Iron Core Dry Type Harmonic Filter Reactor
Product overview:
1.The reactor is a three-phase or single-phase,all of the iron core dry type.
2.Low loss high quality imported cold rolled silicon steel core columns by multiple air gap is notIn the running
process of change.
Coil using For above the wire or foil winding.
After the reactor coil and the iron core are assembled into a whole,the reactor coil and theiron core are firmly
integrated into a whole,and the noise of the running time is greatly reduced.
The reactor core columns fasteners with unmagnetized material,operation to reduce the eddy current heating
phenomenon.
The reactor has the advantages of small size,light weight,beautiful appearance,etc.compared with the similar
products in China it can replace the well-known brands at home and abroad.
Product use:
To reduce the current ratio of the capacitor and the current frequency,to facilitate the selection of ancillary
equipment and protective capacitors.Accroding to the GB500227 standard requirements should be limited to
the current limit of 10 of the capacitor rated current.
The reactor and capacitor capacitance impedance full tuned AC filter,consisting of a harmonic.Filter to a high
harmonic,and reduce the bus on the high harmonic voltage value,so that there is no higher harmonic current
line,improve the quality of the power grid voltage.
Use environment:
Not more than 2000meter above sea level.Operating ambient temperature -25ºC~+45ºC,the relative humidity is
not more than 90%.No toxic gas around,no inflammable and explosive articles.Surrounding environment should
have good ventilation conditions,such as installed in the cabinet,should be the installation of ventilation
equipment.
Technical parameter:
Rated operating voltage | 220V-1200V |
Operating frequency | 50/60HZ |
Rated operating current | 3A-2000A |
Anti electric strength | Iron core winding |
3000VAC/50HZ/5mA/10s | |
No arcing breakdown | |
Insulation resistance | 1000VDC insulation resistance is greater than or equal to 100M.≥100MΩ |
Max current | 1.35*rated current,long run |
Reactor noise | Less than 65Db(1 meter test with reactor level |
Temperature rise | 95K |
Protection level | IP00 |
Insulation class | F level or above |